Module Parameters Overview; Features; Benefits - 3Com 4007 Implementation Manual

3com 4007: install guide

Hide thumbs Also See for 4007:

Table of Contents

Module Parameters

You use the module parameters to set values for specific functions, or to

modify values that are set on a module during power-on. You can modify

only some of the module parameters values.

Using the module parameters, you can set or modify the factory default

values for a module in your Switch 4007 system for the following

Display the module's current configuration

Take a snapshot of a module's current configuration and status

Create and administer a statistics baseline

See the Switch 4007 Command Reference Guide for detailed

information about creating and maintaining baselines.

If you set a baseline while connected to a module and then disconnect

from that module, the baseline is disabled. You must reconnect to the

module and use the

for that module to

Administer nvData

This chapter discusses the redundancy and administering nvData options.

You can also use the module parameters to:

Modify the module name

View the module's date and time

Clear the module's diagnostics block

Reboot the module

See the Switch 4007 Command Reference Guide or online Help for more

information about how to set and modify module parameters.

Using the module parameters to set and modify module functions:

Provides an easy method for both setting and modifying module-level

Decreases the time and cost that it takes to modify a module

configuration if you have to constantly make changes from the same

source then reboot the module to apply the changes

option to change the baseline value

requestedState

4007r - switch