Scan Stand Mode; Scan Stand Symbol - Honeywell 4600RSF051CE User Manual

Scan Stand Mode

When a unit is in Scan Stand mode, it remains idle as long as it sees the Scan
Stand symbol (see below). When a different code is presented, the imager is
triggered to read the new code.
Note: The imager automatically adjusts the illumination LEDs to the lowest light
level possible to maintain a good lock on the Scan Stand symbol. When
a symbol is presented, the imager's light levels adjust to the saved setting
(see LED Power Level
of ambient light to operate correctly.

Scan Stand Symbol

When a unit is in Scan Stand mode, the LEDs shine at the Scan Stand symbol
on the base of the stand which tells it to remain idle. When the Scan Stand
symbol is covered, the imager turns the LEDs on at the configured power level
(default setting is high) and attempts to find and decode barcodes in its field of
view.
3 - 6
on page 3-10). This mode requires at least 50 lux
Scan Stand Mode
Scan Stand Symbol