Upc-E1 - Honeywell 4600RSF051CE User Manual

UPC-E0 Number System
The numeric system digit of a UPC symbol is normally transmitted at the begin-
ning of the scanned data, but the unit can be programmed so it will not transmit
it. To prevent transmission, scan Off. Default = On.
* On
UPC-E0 Addenda
This selection adds 2 or 5 digits to the end of all scanned UPC-E data.
Default = Off for both 2 Digit and 5 Digit Addenda.
2 Digit Addenda On
5 Digit Addenda On

UPC-E1

Most UPC barcodes lead with the 0 number system. For these codes, use
UPC-E0 (page 7-20). If you need to read codes that lead with the 1 number
system, use the UPC-E1 On selection. Default = Off.
UPC-E1 On
7 - 22
Off
* 2 Digit Addenda Off
* 5 Digit Addenda Off
* UPC-E1 Off