Wand Emulation Connection - Honeywell 4600RSF051CE User Manual

Each of the previous barcodes also programs the following suffixes for each
symbology:
.
The IBM 4683 Port 9B HHBCR-2 Interface barcode also programs the following
suffixes for each symbology:

Wand Emulation Connection

Note: See "Imager Models"
your imager.
In Wand Emulation mode, the imager decodes the barcode then sends data in
the same format as a wand imager. The Code 39 Format converts all symbolo-
gies to Code 39.
The Same Code Format transmits UPC, EAN, Code 128, Codabar, and Inter-
leaved 2 of 5 without any changes, but converts all other symbologies to Code
39. 2D symbologies are converted to Code 128.
The Wand Emulation Plug & Play (Code 39 Format) barcode below sets the
terminal ID to 61. The Wand Emulation Plug & Play Same Code barcode
sets the terminal ID to 64. These barcodes also set the Transmission Rate to
Symbology
EAN-8
EAN-13
UPC-A
UPC-E
Code 39
Interleaved 2 of 5
Code 128
IBM 4683 Port 9B HHBCR-2 Interface
Symbology
EAN-8
EAN-13
UPC-A
UPC-E
Code 39
Interleaved 2 of 5
Code 128
on page 1-2 to determine which interfaces apply to
Suffix
0C
16
0D
0A
00 0A 0B
00 0D 0B
00 0A 0B
Suffix
0C
16
0D
0A
00 0A 0B
00 0D 0B
00 18 0B
1 - 13