Related Manuals for Honeywell Solaris 7980g
Summary of Contents for Honeywell Solaris 7980g
- Page 1 Solaris 7980g/7990g Presentation Area Imager Quick Start Guide 7980-7990-EN-QS-01 Rev A 09/22...
-
Page 2: Getting Started
Getting Started Turn off computer’s power before connecting the scanner, then power up the computer once the scanner is fully connected. Power Supply Assembly (if included) Note: The power supply must be ordered separately, if needed. - Page 3 Connecting the Scanner (USB and RS485)
- Page 4 USB: RS485:...
- Page 5 Connecting the Scanner (Keyboard Wedge and RS232 Serial Port) Make sure the power cord is completely inserted into the device...
-
Page 6: Keyboard Wedge
Keyboard Wedge: Note: For Keyboard Wedge, you must use the power supply. RS232 Serial Port: Note: For RS232, you must use the power supply. Reading Techniques Present the barcode to the scanner. The aimer turns on and the LEDs turn up to read the code. If the light level in the room is not high enough, the code may not be read. - Page 7 Standard Product Defaults The following barcode resets all standard product default settings. Standard Product Defaults USB PC Keyboard Scan the following code to program the scanner for a USB PC Keyboard. USB PC Keyboard...
- Page 8 IBM POS terminal using port 17, scan IBM Port 17 Interface barcode below. IBM Port 9B HHBCR-1 Interface IBM Port 9B HHBCR-2 Interface IBM Port 17 Interface Note: For additional RS485 interface selections, see the User Guide for your product at our website, sps.honeywell.com.
-
Page 9: Usb Serial
USB Serial If you are using a Microsoft® Windows® PC, you must download a driver from the Honeywell website honeywell.com/PSSsoftware-downloads The driver will use the next available COM Port number. Scan the following code to program the scanner to emulate a regular RS232-based COM Port. -
Page 10: Keyboard Country
Program Keyboard Country Country Code Scan Country Code Scan Belgium Italy Denmark Norway Finland Spain France Switzerland Germany/ USA (Default) Austria Great Britain Save For a complete list of country codes, see the User Guide for your product at our website, sps.honeywell.com... -
Page 11: Turbo Mode
Turbo Mode This selection is a keyboard modifier, so it may only be used when your interface is USB Keyboard or Keyboard Wedge. The scanner sends characters to a terminal faster using Turbo Mode. If the terminal drops characters, do not use Turbo Mode. Turbo Mode On Turbo Mode Off Scan Modes... - Page 12 Presentation - Mobile Phone Note: For additional scan modes, see the User Guide for your product at our website, sps.honeywell.com Suffix If you want a carriage return after the barcode, scan the Add CR Suffix barcode. To add a tab after the barcode, scan the Add Tab Suffix barcode.
-
Page 13: Poor Quality Pdf Codes
Add Code ID Prefix To All Symbologies Note: For a complete list of Code IDs, see the User Guide for your product at our website, sps.honeywell.com. Poor Quality PDF Codes This setting improves the scanner’s ability to read damaged or badly printed PDF codes by combining information from multiple images. - Page 14 The following are abbreviated instructions for entering a data format. For complete instructions refer to your User Guide, available at our website, sps.honeywell.com. Scan the Enter Data Format symbol. Primary/Alternate Format: scan 0 for Primary Format Terminal Type: scan 099 for any terminal type Code I.D.: scan 99 for any barcode type...
-
Page 15: Programming Chart
Programming Chart... -
Page 16: Limited Warranty
Save Support To search our knowledge base for a solution or to log into the Technical Support portal and report a problem, go to honeywell.com/PSStechnicalsupport. Limited Warranty For warranty information, go to sps.honeywell.com and click Support > Warranties. -
Page 17: User Documentation
For the user guide and other documentation, go to sps.honeywell.com Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.