Lacp Port Settings - D-Link DES-3018 User Manual

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual

LACP Port Settings

This window allows the user to create port trunking groups on the Switch. Using the following window the
user may set which ports will be active and passive in processing and sending LACP (Link Aggregation
Control Protocol) control frames. To view the LACP Settings window click L2 Features > Trunking >
LACP Port Settings
The following fields can be set:
Parameter Description
From....To A consecutive group of ports may be configured starting with the selected port.
Mode
Active - Active LACP ports are capable of processing and sending LACP control frames. This
Figure 7- 11. LACP Settings window
95