D-Link DES-3018 User Manual page 161

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual
SuppTimeout
ServerTimeout
MaxReq
ReAuthPeriod
ReAuth
Forward EAPOL PDU
Both
Click Apply to implement your configuration changes. To view configurations for the 802.1X
Authenticator Settings on a port-by-port basis, click the link
state following a failed authentication exchange with the client. The default setting is
60 seconds.
This value determines timeout conditions in the exchanges between the Authenticator
and the client. The default setting is 30 seconds.
This value determines timeout conditions in the exchanges between the Authenticator
and the authentication server. The default setting is 30 seconds.
The maximum number of times that the Switch will retransmit an EAP Request to the
client before it times out of the authentication sessions. The default setting is 2.
A constant that defines a nonzero number of seconds between periodic re-
authentication of the client. The default setting is 3600 seconds.
Determines whether regular re-authentication will take place on this port. The default
setting is Disabled.
This function allows the user to Enable or Disable the EAPOL PDU received by the
port.
Show Authenticators
148
Setting.