DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual
The page shown below is the Packet Content Mask configuration window.
Figure 9- 5. CPU Interface Filtering Configuration window- Packet Content
This screen will aid the user in configuring the Switch to mask packet headers beginning with the offset
value specified. The following fields are used to configure the Packet Content Mask:
Parameter
Description
Profile ID (1-3)
Type in a unique identifier number for this profile set. This value can be set from 1 - 3.
Type
Select profile based on Ethernet (MAC Address), IP address or packet content mask. This will
change the menu according to the requirements for the type of profile.
Offset
This field will instruct the Switch to mask the packet header beginning with the offset value
specified:
Click Apply to implement changes made.
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet
•
header.
Select IP to instruct the Switch to examine the IP address in each frame's header.
•
Select Packet Content Mask to specify a mask to hide the content of the packet
•
header.
value (0-15) - Enter a value in hex form to mask the packet from the beginning of the
•
packet to the 15th byte.
value (16-31) – Enter a value in hex form to mask the packet from byte 16 to byte 31.
•
value (32-47) – Enter a value in hex form to mask the packet from byte 32 to byte 47.
•
value (48-63) – Enter a value in hex form to mask the packet from byte 48 to byte 63.
•
value (64-79) – Enter a value in hex form to mask the packet from byte 64 to byte 79.
•
126