D-Link DES-3018 User Manual page 142

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual
The following window is the CPU Interface Filtering Rule Table for IP.
To create a new rule set for an access profile click the Add button. A new window is displayed. To remove a
previously created rule, click the corresponding
configuration.
Configure the following Access Rule Configuration settings for IP:
Parameter Description
Profile ID This is the identifier number for this profile set.
Mode Select Permit to specify that the packets that match the access profile are forwarded by the
Switch, according to any additional rule added (see below).
Select Deny to specify that packets that match the access profile are not forwarded by the
Switch and will be filtered.
Access ID Type in a unique identifier number for this access. This value can be set from 1 - 5.
Type Selected profile based on Ethernet (MAC Address), IP address or Packet Content.
Figure 9- 10. CPU Interface Filtering Rule Table – IP
Figure 9- 11. CPU Interface Filtering Rule Configuration – IP
Ethernet instructs the Switch to examine the layer 2 part of each packet header.
•
IP instructs the Switch to examine the IP address in each frame's header.
•
button. The following window is used for the IP Rule
129