Table of Contents
Advertisement
Figure 6-22. System Reset
2. Move the cursor to Yes to confirm the reset and press Enter. The
switch should restart.
Factory Reset
Before performing a factory reset, be absolutely certain that this is what you
want to do. Once the reset is done, all of the switch's settings stored in
NVRAM
(including
TCP/IP
parameters,
SNMP
parameters,
the
enabled/disabled settings of ports, security settings, etc.) will be erased and
restored to their factory default settings.
1. Choose Factory Reset NVRAM to Default Value from the main menu.
52
Using the Console Interface
Advertisement
Table of Contents
