Setting Up The Switch; Tcp/Ip Settings - D-Link DES-2218 User Manual

DES-2218 Ethernet Switch User's Guide
Figure 6-9. Deleting a User
4. Choose SAVE and press Enter to let the user addition take effect.
5. Choose EXIT to leave the Delete Users menu.

Setting up the Switch

This section describes the settings you will need to change to allow you to be
able to manage the switch from an SNMP-based Network Management
System such as D-Link's D-View, or to be able to access the switch using the
Telnet
protocol.

TCP/IP Settings

The switch needs to have a TCP/IP address assigned to it so that the network
management system or Telnet client can find it on the network. The
TCP/IP Parameters Configuration Menu allows you to change the settings for
the two different interfaces used on the switch: the Ethernet interface used for
in-band communication, and the SLIP interface used over the console port
for out-of-band communication.
31
Using the Console Interface