Power On - D-Link DES-1016D User Manual

10/100 NWay Ethernet/Fast Ethernet Switch User's Guide
Figure 2.2 Installing the 10/100 NWay Ethernet/Fast Ethernet
Switch in an equipment rack

Power on

The Switch can be used with AC power sources 100 - 240 VAC, 50 -
60 Hz. The power switch is located at the rear of the unit adjacent
to the AC power connector. To turn the Switch on, press the power
switch to the on or "1" position. The Switch's power supply will
adjust to the local power source automatically and may be turned
on without having any or all LAN segment cables connected.
6 Unpacking and Setup