Onkyo TX-NR3009 Instruction Manual page 15

■
7.2-channel Playback with Speakers A or Speakers B
The following illustration shows how to connect the speakers for up to 7.2-channel playback with Speakers A or
Speakers B. If you're using only one surround back speaker, connect it to the SURR BACK/ZONE 3 L terminals.
Front B right Front A right Front A left Front B left Center
Surround Front high Surround Surround Front high Surround
right right back right back left left left
Note
• The speakers are configured by using the "Speaker Setup" setting (➔ page 51).
(➔ page 45).
• You can choose which speakers you want to use with Speakers A or Speakers B
Using Dipole Speakers
You can use dipole speakers for the surround and surround back speakers. Dipole
speakers output the same sound in two directions.
TV/screen
Dipole speakers typically have an arrow printed on them to indicate how they should be
positioned. The surround dipole speakers (a) should be positioned so that their arrows
point toward the TV/screen, while the surround back dipole speakers (b) should be
positioned so that their arrows point toward each other, as shown.
a a
b b
En
15