Using Your Dvd Player(Certain Models Only) - Haier LT26K3 Instruction Manual

USING YOUR DVD PLAYER (certain models only)
PLAYING A DVD
1.Press the SOURCE button on the remote control to
enter DVD mode.
2.Place the DVD in the disc slot with the DVD label
facing away from you and the screen. The disc slot
will only take standard-sized DVD.
3.The DVD will automatically load; most begin with
a disc menu.
4.Use the , , and buttons to navigate around
the DVD menu to highlight the play option and then
press PLAY/PAUSE.
PAUSING A DVD
1.Press PLAY/PAUSE to pause playback. The sound
will also be muted.
2.Press PLAY/PAUSE to resume normal playback.
STOPPING A DVD
1.Press the button to stop playback of a DVD. The
TV screen will show the DVD start-up logo.
2.Some discs will remember the moment at which the
DVD was stopped, so press PLAY/PAUSE to recall the
moment and continue playback.
3.Press the button twice to stop completely and
clear the memory.
USING FAST FORWARD OR REWIND
1.To move forward through a disc more quickly, press
the button.
To rewind through the disc, press the
2.Press the or button repeatedly to cycle through
the available speeds, which appear in the top left
corner of the screen: 2X, 4X, 8X, 16X, 32X and normal
playback speed.
3.Press PLAY/PAUSE to resume normal playback.
SKIP TO THE NEXT OR PREVIOUS SCENE
During playback press the
scene on the disc, or press
PASSWORD
Parental control can be activated by setting the Password
Mode to On. The default password is 0000. If you forget
the password, you can always input 1369 to regain control.
button.
button to skip to the next
to skip to the previous one.