Connecting Your Tv; Connecting The Aerial; Improving Your Signal; Connecting Your Pc To The Tv - Haier LET32T1000HF Instruction Manual

Connecting your TV

Connecting the aerial

Connect your aerial into the ANTENNA IN socket at the
back of the TV.

Improving your signal

To improve picture quality in poor signal areas, use a
signal amplifier (not supplied).

Connecting your PC to the TV

You can use your TV as a monitor for your personal
computer using a VGA cable (not supplied).
Consult your computer's user guide to check
whether it has a VGA connector.
Turn the power off on your TV and PC.
Connect a D-type 15-pin VGA interface cable to the
VGA video interface connector on the PC. Connect
the other end of the cable to the PC interface
connector on the TV. Tighten the screws on the
VGA connectors and connect the audio cable (not
supplied) to the audio input socket on the back of
the TV.
Switch on the TV first, followed by the PC.
Press the button on the TV or TV remote control to
set the video input mode to PC.
If noise is present on the image, change the
resolution, refresh rate, brightness and contrast on
the menu until the picture is clear.

Connecting a DVD player to your TV

Connect the DVD video outputs (Y, P
COMPONENT (Y, P , P ) IN socket on your TV.
b r
Turn on the DVD player and insert a DVD.
Press the SOURCE button to select COMPONENT
mode.
Connecting a DVD player or VCR to
your TV
There are two ways to connect a DVD player or VCR to
your TV. Make sure that either the TV and DVD player, or
VCR, are switched off before you connect them.

SCART input

HDMI input

Mounting your TV onto the wall

, P ) to the
b r
You can mount your TV onto the wall using a wall
bracket (not supplied). Use M6 machine screws (4 pcs) to
screw the TV onto the bracket (not supplied).
Refer to the DVD player's user guide for operating
instructions.
DVD
Connect the scart lead from the external device
(DVD player, set-top box or games console) to the TV
scart socket.
Press the SOURCE button to select SCART mode.
Press the PLAY button on the external device.
Connect the cable from the HDMI device to the TV
HDMI socket.
Press the SOURCE button to select HDMI mode.
Refer to the HDMI device's user guide for
instructions.
Digital LED LCD television user's manual EN-10 10
About your LED LCD TV
(Q