Choose Your Connection; Vcr Connection; External Av Source; Connecting A Dvd Player - Haier LE42A300 Owner's Manual

Choose Your Connection

There are several ways to connect your television,
depending on the components you want to connect and
the quality of the signal you want to achieve.
The following are examples of someways to connect
your TV. Choose the connection which is best for you.

VCR Connection

To avoid picture noise (interference), leave an adequate
distance between the VCR and TV.
Connection Option 1
Set VCR output switch to channel 3 or 4 and then tune
the TV to the same channel number.
Connection Option 2
Connect the audio and video cables from the VCR's
output jacks to the TV input jacks, as shown in the
figure. When connecting the TV to VCR, match the
jack colors (Video = yellow, Audio Left = white, and
Audio Right = red).
Insert a video tape into the VCR and press PLAY on
the VCR. (Refer to the VCR owner's manual.)
Select the input source with using the SOURCE button
on the remote control, and then press
select the source, press the
/ button to
button to confirm.
External Equipment Connections
External AV Source Setup
How to connect
• Connect the audio and video cables from the
external equipment's output jacks to the TV input
jacks, as shown in the figure.
• When connecting the TV to external equipment,
match the jack colors (Video = yellow, Audio Left =
white, and Audio Right = red).
PC PC/DVI AUDIO Y / VIDEO P
b
PC IN COMPONENT / AV2 IN
How to use
Select the input source with using the SOURCE
button on the remote control.
Press CH+/- button to select the desired source.
Press OK button to confirm.
Operate the corresponding external equipment.

Connecting a DVD player

How to connect
Connect the DVD video outputs (Y, P
to the COMPONENT (Y, P
the TV and connect the DVD audio outputs to the
AUDIO jacks on the TV' as shown in the figure.
LED -LCD television Owner's Manual
P L - AUDIO - R
r
DSMB
/C , P /C )
b b r r
/C , P /C ) input jacks on
b b r r
11