Wave Display Popup Window Linked With Locate Operations - Yamaha AW4416 Supplement Manual

WAVE DISPLAY popup window linked with Locate
operations
When the WAVE DISPLAY popup window is displayed, you can now use the fol-
lowing keys to move the pointer location.
Operating these keys merely moves the pointer location, and does not affect the
counter location.
• [RTZ] key ........................ Move the pointer to the zero position.
• [ ]/[
• [ ]/[ ] keys ................. Move the pointer to the previous/next marker.
• [A]/[B] keys ..................... Move the pointer to the A/B points.
• [IN]/[OUT] keys .............. Move the pointer to the in/out points.
In addition, it is now possible to specify the current pointer location as a locate
point while the WAVE DISPLAY popup window is displayed. The procedure is as
follows.
• Press the [MARK] key ...... A marker will be set at the current pointer location.
• Hold down the [SET] key and press the [A]/[B] key
• Hold down the [SET] key and press the [IN]/[OUT] key
Refer to: WAVE DISPLAY popup window
Locate operations
To locate to the pointer location, move the cursor to the LOCATE button and
press the [ENTER] key.
pointer location
] keys.............. Move the pointer to the start/end points.
The A/B point will be set at the current pointer
location.
The in/out point will be set at the current pointer
location.
Operation Guide p.115
Additions and changes in version 1.2, 1.3
pointer
Reference Guide p.93
13