Changed Procedure For Deleting A Locate Point Or Marker - Yamaha AW4416 Supplement Manual

Additions and changes in version 1.2, 1.3
Changed procedure for deleting a Locate Point or
Marker
The procedure for deleting a locate point / marker in the TRACK screen Mark Adj.
page has changed. The procedure is as follows.
1. In the RECORDER section, press the [TRACK] key
The TRACK screen Mark Adj. page will appear.
Tip
• You can repeat step 2 to select multiple locate points. However, only one
• It is not possible to delete the start / end points.
2. Select the locate point / marker that you wish to delete, move the cursor to the
button at the left of the display, and press the [ENTER] key.
The "D" character will be displayed on the button. This indicates that the corre-
sponding locate point / marker has been selected for deletion.
The deletion procedure described on p.125 of the Operation Guide cannot be
used in version 1.2.
3. Move the cursor to the DELETE button, and press the [ENTER] key.
The locate point / marker you selected in step 1 will be deleted. If an in/out point
or A/B point was deleted, the corresponding key ([IN]/[OUT] key or [A]/[B] key)
will go dark.
Refer to: Deleting a locate point
14
marker can be selected for deletion.
[F4] (Mark Adj.) key.
Operation Guide p.125