Table of Contents
Advertisement
Control
Window
Figure 9: D-Link AirPremier DWL-1800 Configuration Utility Main Window (Station
3.2.1.1 The Control Window
3.2.1.1.1 Selecting Units
You can select a unit to manage in one of the following ways:
Click the Network Autodiscovery button. All the IP addresses of units in
the same domain but not hidden behind a router (under the selected
community) are displayed in the list box underneath the button. Click on
an address to select the corresponding unit for viewing and
configuration.
Type the unit's IP address in the Locate Unit field (for stations which are
located behind a router) and click
information to the selection list.
Control Tab)
21
. This will add the unit
Tabs
Section
Advertisement
Table of Contents
