3. THE D-LINK AIRPREMIER DWL-1800
CONFIGURATION UTILITY
The D-Link Air Premier DWL-1800 Configuration Utility is an SNMP-based utility
that provides a consistent view of the wireless network. The system administrator
can use the D-Link AirPremier DWL-1800 Configuration Utility to control a large
number of DWL-1800 units from a single location. The Configuration Utility can be
used to manage DWL-1800B(BU) and DWL-1800R (RB)units as well as other
members of the D-Link wireless family including D-Link Air and Air Plus Series
i.e. DWL-900AP, DWL-900AP+, DWL-520, DWL-520+, DWL-650, DWL-650+.
The description in this manual, however, is limited to management and
configuration of DWL-1800B and DWL-1800R units.
Using the Configuration Utility you can:
Assign radio channels for optimal cell operation.
Configure units with a specified IP address.
Set the SNMP Read/Write Community strings.
Verify the status of all units in the network.
Configuration of a wide range of operational parameters, including
WLAN, IP and Security parameters.
View Tx and Rx counters.
Obtain general information such as the Firmware version and system
name.
18