Flow Control - D-Link DIR-806A User Manual

DIR-806A Wireless AC750 Multi-Function Router
User Manual

Flow Control

On the Advanced / Flow Control page, you can enable and disable data flow control for the
WAN port of the router.
This function is used for equal load balancing in ISPs' networks. Contact your ISP to clarify if this
function needs to be enabled.
To enable the flow control function, select the Enabled checkbox and click the Apply button.
To disable the flow control function, deselect the Enabled checkbox and click the Apply button.
Figure 112. The Advanced / Flow Control page.
Page 156 of 233
Configuring Device (Router Mode)