Configuration; Web-Based Configuration Utility - D-Link DSL-2730B User Manual

Hide thumbs Also See for DSL-2730B:

Table of Contents

Section 3 – Configuration

This section will show you how to set up and configure your new D-Link Router using the Web-based configuration utility.

Connect to the Router

To configure the WAN connection used by the Router it is first necessary to communicate with the Router through its management interface, which

is HTML-based and can be accessed using a web browser. The easiest way to make sure your computer has the correct IP settings is to configure

it to use the DHCP server in the Router. The next section describes how to change the IP configuration for a computer running a Windows operating

system to be a DHCP client.

To access the configuration utility, open a web-browser such as Internet

Explorer and enter the IP address of the router (192.168.1.1).

Type "admin" for the Username, "admin" in the Password field. In the

Validate entry field, type the letters that appear below. If you cannot read

the letters, click on

refresh

to view a new randomly generated set of five

letters. The Validate field is not case sensitive so upper or lower case

letters work. Click Login when the you have filled in the three login fields.

If you get a Page Cannot be Displayed error, please refer to the

Troubleshooting section for assistance.

D-Link DSL-2730B User Manual

Configuration

Table of Contents