Table of Contents
Advertisement
Update File
Browse
Tools − Ping
Ping is a small program that will send a series of test packets to a network
device and ask for the device to send the packets back to the source. It is
v
ery useful to determine if a given network device is properly connected to
the network and is operating properly.
To ping an IP address, enter the IP address in the IP address field, en
number of packets you want to send in the Count number field
usually sufficient) and click the Apply button. The results will be displayed
in the field with a scroll bar to the right, as shown below.
Enter the full DOS path and f
firmware file on your lo
exam
ple, if the file is in the root directory of
your C drive, enter C:
\newfile.had and click the
OK button to begin the f
If you are unsure about the location of the new
firmware file on your local
Browse button to open a W
window to look for this file.
ilename to the new
cal hard drive. For
ile transfer.
hard drive, click the
indows Explorer
ter the
(three is
Advertisement
Table of Contents
