Table of Contents
Advertisement
Add/New Tunnel
Tunnel ID
Termination IP
Shared Key
Local SPI
Remote SPI
IPSec Operation
The following fields will identify the Manual
Key VPN tunnel on the DFL-600.
An alphanumeric string that identifies the
remote tunnel. A sting of up to 63 characters
can be entered. The Tunnel ID is som
called the Negotiation ID of the remote
gateway
.
The IP address of the remote gateway.
The encryption key that should be entered
exactly the same way on both endpoints in
order to establish Phase 1 negotiation.
Refers to the SPI of your DFL-600 when
establishing a VPN tunnel.
Refers to the SPI of the remo
which the VPN tunnel will be
This drop-down menu a
kind of encryption that will be app
packets that are sent between the tw
of a VPN tunnel.
ESP − specifies that the en
encrypted (by the DES or 3DES algorithm
selected below) and authenticated (by the MD5
or SHA algorithm, as selected below).
AH − specifies that only the auth
algorithm (MD5 or SHA, as selected below)
will be used. When AH is selec
portion of packets sent between the two
endpoints of a VPN tunnel will not be
encrypted.
etimes
te peer toward
established.
llows you to select the
lied to
o endpoints
tire packet will be
, as
entication
ted, the data
Advertisement
Table of Contents
