Table of Contents
Advertisement
AH Transform
AH Auth Key (ASCII)
Type
Starting Target Host
Authentication key on both ends of a VPN
tunnel.
This drop-down menu allows you to select the
authentication method that will be used when
AH is selected in the IPSec Operation drop-
down menu above.
You can choose between MD5 − usi
message digest authentication, and SHA −
using the SHA authentication method.
Y
ou must select the exact same AH
authentication method on both ends o
tunnel.
Enter th
e predetermined alphanumeric AH
Authorization key. The length of the key wi
vary depending upon the choice of AH
Transform in the drop-down menu above
Y
ou must select the exact same AH
Authorization key on both ends of a V
tunnel
This dro
p-down menu allows you to select the
type of network definition for the range of IP
addresses on the remote LAN that will be
allowed to access the VPN. At the time of the
writing of this manu
al, only the Subnet type is
su
pported.
This is the first IP address of a subnet range of
IP addresses of computers on the remote LA
that will be allowed to access the VPN.
c
ase, the entire subnet of IP addresses from
192.168.2.1 to 192.168.2.254 will be
access the VPN.
Note that the IP addresses192.168.2.0 and
192.168.2.255 are reserved for use on the
remote network.
ng MD5
f a VPN
ll
.
PN
N
In this
allowed to
Advertisement
Table of Contents
