Table of Contents
Advertisement
Network Address
Subnet Mask
Interface Name
Multicast Support
Update Timer
Timeout Timer
Garbage Collection
Timer
Routing Information
Your DFL-600 can automatically discover routes to destinations on both your
LAN and the WAN (Internet), and you can also enter routing information
statically. To display the Routing Information table, click on the Routing
Information link. This information is displayed in the Routing Information
table, as shown below.
LAN RIP interface will disable the routing
function of your router.
This is the IP address of either the LAN or WAN
side of your DFL-600.
This is the subnet mask corresponding to the
Network Address above.
This is the name of the interface corresponding
to the Network Address above.
You can enable or disable multicast support. It
is recommended that you enable this feature.
This allows you to specify how often the DFL-
600 will update its routing table. The default is
30 seconds.
This allows you to specify how long a route
discovered by the DFL-600 will remain in its
memory without being used. The default is 180
seconds.
This allows you to specify the period of time
between the collection of garbage routes. The
default is 120 seconds.
Advertisement
Table of Contents
