Using The Configuration Utility - D-Link DWL-G700AP Manual

Using the Configuration Utility

If you wish to change the default settings or optimize the performance of the
DWL-G700AP, D-Link has included a configuration utility for this purpose.
After you have completed the initial installation and the Setup Wizard (as illustrated in
the Quick Installation Guide that is included with the DWL-G700AP), you can access
the configuration menu, at any time, by opening the web-browser and typing in the IP
address of the DWL-G700AP. The DWL-G700AP's default IP address is shown below:
Open the web browser
Type in the IP address of the
DWL-G700AP. (192.168.0.50).
Note: If you have changed the default IP address assigned to the DWL-G700AP, make
sure to enter the correct IP address.
Type admin in the
User Name field
Leave the Password
blank
Click OK
The Home>Wizard screen
will appear. Please refer to
the Quick Installation Guide
for more information
regarding the Setup Wizard.
9
admin