D-Link DWL-G700AP Manual page 36

Troubleshooting (continued)
4. Resetting the DWL-G700AP to Factory Default Settings
After you have tried other methods for troubleshooting your network, you may
choose to Reset the DWL-G700AP to the factory default settings. Remember that
D-Link AirPlus G products network together, out of the box, at the factory default
settings.
To hard-reset the D-Link AirPlus G DWL-G700AP to Factory Default Settings,
please do the following:
Locate the Reset button on the back of the DWL-G700AP
Use a paper clip to press the Reset button
Hold for about 5 seconds and then release
After the DWL-G700AP reboots (this may take a few minutes) it will be
reset to the factory default settings.
36