D-Link AirPremier DWL-1700AP Quick Installation Manual

This product can be set up using This product can be set up using This product can be set up using
This product can be set up using This product can be set up using
any current web browser, i.e., any current web browser, i.e.,
any current web browser, i.e., any current web browser, i.e., any current web browser, i.e.,
Internet Explorer or Netscape Internet Explorer or Netscape
Internet Explorer or Netscape Internet Explorer or Netscape Internet Explorer or Netscape
Navigator. Navigator. Navigator. Navigator. Navigator.
Before You Begin Before You Begin
Before You Begin Before You Begin Before You Begin
It's best to use a computer (with an Ethernet adapter) that is connected to a switch for
configuring the DWL-1700AP. The default IP address for the DWL-1700AP is
192.168.0.50:2000 with a Subnet Mask of 255.255.255.0 on the wired Ethernet side.
The default setting of the wireless side is 192.168.1.50, with the same subnet
mask.You will need to assign your computer a Static IP address within the same range
as the DWL-1700AP's IP address for the purpose of configuring the DWL-1700AP. See
the Manual on the CD-ROM if you need assistance in assigning a Static IP address
for your network adapter.
Check Your Package Contents Check Your Package Contents Check Your Package Contents
Check Your Package Contents Check Your Package Contents
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DWL-1700AP+. 03242003
DWL-1700AP Wireless Access Point
Inline Power Injector
Two rubber dipole antennas
30M MIL-C-5015 Ethernet
Cable
1
DWL-1700AP DWL-1700AP DWL-1700AP
DWL-1700AP DWL-1700AP
Air Air
D-Link D-Link Air D-Link Air Air Premier Premier Premier Premier
D-Link D-Link Premier
Wireless Access Point Wireless Access Point Wireless Access Point
Wireless Access Point Wireless Access Point
TM TM TM
TM TM