D-Link DWL-G700AP Manual page 12

Using the Configuration Utility (continued)
Home > DHCP
DHCP Server:
If you want to use the DWL-G700AP as a DHCP server, to automatically assign
dynamic IP addresses on the network, you will select Enabled.
Starting IP Address:
starting point of the IP address range for your network.
Ending IP Address:
have enabled the DHCP function of the DWL-G700AP.
Lease Time:
Choose the length of time during which the DHCP function of the
DWL-G700AP automatically regenerates the IP addresses to the devices in your network.
DHCP Client Table:
IP addresses from the DWL-G700AP.
Select Enabled or Disabled. Disabled is the default setting.
If you have enabled the DHCP server function, enter the
Enter the ending IP address of your IP address range, if you
Lists the devices on your network that are receiving dynamic
12