Yamaha RX-V665 Owner's Manual page 34

FM/AM tuning
During the automatic station preset, the upper area of
the screen changes as follows: READY → SEARCH
→ MEMORY each time a station is registered.
When registration is complete, "FINISH" appears
and the option menu screen automatically reappears.
When you press nOPTION on the remote control,
the screen returns to the original state.
Registering stations by manual station
preset
You can manually register AM stations or FM stations
with weak signals.
1
Tune in to a station referring to "Tuning in to
the desired FM/AM station (Frequency
tuning)" (see page 29).
2
Press FMEMORY (or iMEMORY).
"Manual Preset" appears on the front panel display,
followed soon by the preset number to which the
station will be registered.
y
• By pressing down FMEMORY (or iMEMORY) for more
than 2 seconds, you can skip step 3 and register the preset number
to be one higher than the last preset number.
3
Press GPRESET l / h (or iPRESET k / n)
on the remote control to select the preset
number to which the station will be
registered.
When you select a preset number to which no station
is registered, "Empty" appears on the display. When
you select a registered preset number, a registered
frequency is displayed on the right of the preset
number.
New registered frequency
01:Empty
Empty (or frequency that is currently
Flashing
registered to the preset number)
Preset
number
y
• You can select a preset number using the tNumeric keys.
4
Press FMEMORY (or iMEMORY) again to
register.
When registration is complete, the screen returns to
the original state.
To end the operation, press nOPTION.
y
• To cancel registration, press oRETURN on the remote control
or leave the tuner without any operations for about 30 seconds.
30
En
Calling a preset station (Preset tuning)
You can call preset stations registered by automatic station
preset or manual station preset.
Press GPRESET l / h (or iPRESET k / n) to
select a preset number.
y
• Preset numbers to which no stations are registered will be skipped.
• When "No Presets" or "No Presets in Memory" is displayed it means that
no stations are registered. See page 29 and register stations.
• You can directly select a preset number by pressing a tNumeric
keys while calling a preset station. "Empty" appears on the display if
you enter a preset number to which no station is registered. "Wrong
Num." appears if you enter an invalid number.
Clearing the preset station
1
Press OINPUT l / h repeatedly (or press
hTUNER) to switch the input source to
"TUNER."
2
Press nOPTION on the remote control.
The option menu screen for setting options of tuner
input appears on the front panel display.
3
Display "Clear Preset" using the oCursor k
/ n and press oENTER.
The following screen appears on the display.
01:FM 92.5 MHz
Preset number of the registered station you want to clear.
y
• You can cancel the operation and return to the option menu screen
by pressing oRETURN on the remote control.
4
Select the preset number of the registered
station you want to clear using the oCursor
k / n and press oENTER.
The preset station registered to the selected preset
number is cleared. To clear the registration of
multiple preset numbers, repeat the above steps.
To end the operation, press nOPTION.