Placing Speakers - Yamaha RX-V373BL Owner's Manual

1 2 3 4 5 6 7 8 9
Speaker placement
1

Placing speakers

Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the
representative speaker layout examples.
Caution
• (U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit's speaker impedance to "6 MIN". In this case, you can also use 4-ohm speakers as the front speakers.
For details, see "Setting the speaker impedance" (p.14).
• (Except for U.S.A. and Canada models)
Use speakers with an impedance of at least 6 .
Speaker type Abbr.
1
Front (L)
Produce front right/left channel sounds (stereo sounds).
2
Front (R)
3
Center Produces center channel sounds (such as movie dialogue and vocals).
4
Surround (L)
Produce surround right/left channel sounds.
5
Surround (R)
Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.
9
Subwoofer
This channel is counted as "0.1".
Function
Speaker system (the
number of channels)
5.1 4.1 3.1
● ● ●
● ● ●
● ●
● ●
● ●
● ● ●
PREPARATIONS ➤ Placing speakers
2.1
●
●
●
12
En