Yamaha RX-V373BL Owner's Manual page 53

❑ Subwoofer Trim (SW.Trim)
Fine-adjusts the subwoofer volume during playback.
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
Default
0.0 dB
■
Lipsync (Lipsync)
Enables/disables the adjustment configured in "Lipsync" (p.61) in the "Setup" menu.
• This setting is applied separately to each input source.
Settings
Off (Off) Disables the "Lipsync" adjustment.
On (On) (default) Enables the "Lipsync" adjustment.
■
Signal Info (Signal Info)
Displays information about the video/audio signal.
Choices
Format (FORMAT) Audio format of the input signal
The number of source channels in the input signal (front/surround/
LFE)
Channel (CHAN)
For example, "3/2/0.1" means 3 front channels, 2 surround channels,
and LFE.
Sampling (SAMPL) The number of samples per second of the input digital signal
Bitrate (B RATE) The amount of data per second of the input bitstream signal
Input (V IN) Type and resolution of input signal
Output (V OUT) Type and resolution of output signal
• To switch the information on the front display, press the cursor keys (q/w) repeatedly.
■
Audio In (Audio In)
Combines the video jack of the selected input source (HDMI 1–4 or AV 1–2) with an
audio jack of others. For example, use this function in the following cases.
• Connecting a playback device that supports HDMI video output, but not HDMI audio
output
• Connecting a playback device that has component video jacks and analog stereo
jacks (such as game consoles)
Input sources
HDMI 1–4, AV 1–2
■
Setup procedure
(To input audio through a digital optical jack)
Select "AV 1" or "AV 4" and connect the device to the unit's corresponding audio jacks
with a digital optical cable.
(To input audio through a digital coaxial jack)
Select "AV 2" or "AV 3" and connect the device to the unit's corresponding audio jacks
with a digital coaxial cable.
(To input audio through analog audio jacks)
Select "AV 5", "AUDIO 1", or "AUDIO 2", and connect the device to the unit's
corresponding audio jacks with a stereo pin cable.
■
Video Out (Video Out)
Selects a video to be output with radio sounds.
Settings
Off (Off) (default)
HDMI 1–4, AV 1–5,
V-AUX
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)
Does not output video.
Outputs video input through the corresponding video input jacks.
53
En