End Of Program - Beko WMB91242L Installation & Operating Instructions And Washing Guidance

Adjust the spin speed. Press "Start/Pause/
Cancel" button. The program continues,
pumps out the water and spins. The
Standby Symbol fades out and Start
Symbol lights up.
If you want to discharge the water only
without spinning:
Press "Start/Pause/Cancel" button. The
Standby symbol will fade. The Start symbol
will light up. The program continues and
only drains the water.

End of program

When the program is finished, the symbols
of the relevant steps will remain lit up and
the auxiliary function, spin and temperature
data selected at the start-up of the program
will remain selected. "End" will appear on
the display.
23 - EN