Canceling The Program; End Of The Program - Beko WTV7825XCW1 User Manual

†
Remove the emergency handle from the
loading door behind the filter cover with a tool.
†
Open the loading door by pulling down
the loading door emergency lever.
†
If the door does not open, try
pulling the lever down again.
†
Return the loading door emergency lever
to its original position after
opening the loading door.
4.3.15 Changing the selections after
the program has started
To put the program in pause mode:
While the program is running, press the start/
pause button to put the machine in pause
mode. The light of the current program will
flash on the program progress indicator,
indicating that the machine has entered
pause mode.
If the door can be opened, the loading door light
will go out in addition to the program step light.
Changing the auxiliary function,
spin speed and temperature
Depending on the program step reached, you
can cancel or select the auxiliary functions. See
"Selection of auxiliary functions".
You can also change the speed and temperature
settings. See "Spin speed selection" and
"Temperature selection".
C
INFORMATION
• If the change is not allowed, the relevant
light will flash 3 times.
Add and remove laundry
1. Press the start/pause button to pause
the machine. The light of the relevant
program, which the machine was in
when it was paused, will flash.
2. Wait until the loading door can be opened.
3. Open the loading door and add or
remove laundry.
4. Close the loading door.
5. If necessary, change the auxiliary functions,
temperature and spin speed settings.
6. Press the start/pause button to
start the program.
22 / NL

4.3.16 Canceling the program

To cancel the programme, turn the program
selector knob to another programme. The
previous program is cancelled. The end/cancel
light flashes continuously to indicate that the
program has been cancelled.
Your machine will end the program when you
turn the program selector knob, but it will not
drain the water inside. If you select and start a
new program, the newly selected program will
start depending on the step in which the
previous program was cancelled. For example,
the machine can take in extra water or continue
washing with the water inside.
C
INFORMATION
• Depending on the step in which the
program was cancelled, you may need
to add detergent and softener again
for the newly selected program.

4.3.17 End of the program

At the end of the program, "End" will be
displayed.
1. Wait until the loading door light is
completely off.
2. To switch off the machine, turn the
program selector knob to the on/off
position.
3. Take out your laundry and close the loading
door. Your machine is now ready for the next
wash cycle.
4.3.18 Your machine has the
"Pause mode" function
If you do not start a program in the selection
step or do nothing else after using the on/off
button to switch on the machine, or if you do
not perform any other operation within 10
minutes after the selected program ends, the
machine will switch off automatically. to
power saving mode. And if your product has a
display that shows the program time, this
display will also be turned off completely. If
you turn the program selector knob or touch
any button, the lights and display will return
to the previous position. The choices you
make when exiting Energy Efficiency Mode
may vary. Please check that your choices are
correct before starting the program. Adjust
the choices again if necessary. This is not a
defect.
Washing Machine / User Manual