Spin Speed Selection - Beko WMB91242L Installation & Operating Instructions And Washing Guidance

Spin Speed selection

Whenever a new program is selected,
the maximum spin speed of the selected
program is displayed on the spin speed
indicator.
To decrease the spin speed, press the
"Spin" button. Spin speed decreases
gradually. Then, rinse hold and no spin
options are shown respectively.
Rinse hold is shown with "
is shown with " " symbols.
F1
If you are not going to unload your clothes
immediately after the cycle, you may use
rinse hold function in order to prevent your
clothes become wrinkled when there is no
water in the machine. With this function,
your laundry is kept in the final rinsing water.
If you want to spin your laundry after the
rinse hold function:
- Adjust the spin speed.
- Press "Start/Pause/Cancel" button.
Program resumes. Your machine drains
the water and spins your laundry.
You can use no spin function in order to
drain the water without spinning at the end
of the program.
" and no spin
F3
F2 F4
18 - EN