Starting The Program; Progress Of Program - Beko WMB91242L Installation & Operating Instructions And Washing Guidance

1. Open the loading door, place the
laundry inside and fill detergent drawer.
2. Set the washing program, temperature,
spin speed and, if required, select the
auxiliary functions.
3. Press "Time delaying" buttons "+" and
"-" to set your desired time delay. The
Time delaying symbol will flash.
4. Press "Start/Pause/Cancel" button.
Then the time delay starts to count
down. The Time delaying symbol will
light up. The Start symbol will light up.
The ":" in the middle of the displayed
time delay will start to flash.
•
More laundry may be loaded or taken
out during the time delay period. At
the end of the time delay countdown
process, time delaying symbol fades
and the washing starts as the program
duration is displayed.
Changing the delay time
If you want to change the time during the
countdown:
1. Press "Start/Pause/Cancel" button. "
: " in the middle of the screen will stop
flashing. The Standby symbol will light
up. The Time delaying symbol will flash.
The Start Symbol will fade.
2. Press "Time delaying" buttons "+" or "-"
to set your desired time delay.
3. Press "Start/Pause/Cancel" button. The
Time delaying symbol will light up. The
Standby symbol will fade. The Start
symbol will light up.
4. The ":" in the middle of the displayed
time delay will start to flash.
Canceling the time delay
If you want to cancel the time delay
countdown and start the program
immediately:
1. Press "Start/Pause/Cancel" button. The
":" in the middle of the displayed time
delay will stop flashing.
2. Start symbol will fade. The standby
symbol and the time delaying symbol
will flash.
3. Press time delaying button "-" to
decrease the desired time delay.
Program duration after 30 minutes shall
be displayed.
4. Press Start/Pause/Cancel Button to
start the program.

Starting the Program

1. Press Start/Pause/Cancel button to
start the program.
2. The start symbol which indicates that
the program has started will light up.
3. The door locks and the door locked
symbol will light up.
4. The Symbol of the relevant step
(prewash, main wash, rinse, softener
and spin) that the program has started
from will light up.

Progress of program

The progress of a running program is shown
through a number of symbols on the screen.
•
At the beginning of each program step,
the relevant symbol in the series of
symbols will light up and thus, at the
end of the program, all symbols will
remain lit up. The symbol that lights up
at the far right of the series of symbols
indicates the step that is being carried
out.
Pre-wash
When "prewash" auxiliary function is
selected, prewash symbol will light up to
indicate the beginning of prewash step.
Main wash
Main wash symbol will light up to indicate
that the main wash cycle has started.
Rinse
Rinse symbol lights up at the beginning of
the rinse step.
Softener
Softener symbol lights up at the beginning
of softener step.
Spin
Spin symbol will light up at the beginning
of the final spin, during "Spin" and "Pump"
special programs.
•
If the machine is not spinning, the
program may be in rinse hold mode or
the automatic spin correction system
has been activated due to an excessive
unbalanced distribution of laundry in the
machine.
21 - EN