Quick Start Guide - Pioneer VSX-D709S Operating Instructions Manual

Quick Start Guide

This is a quick guide to setting up your new receiver so you can get home theater surround sound. For more
details on any of the information presented here check the main section of the manual.
Before making or changing the connections, switch off the power and disconnect the power cord from
the AC wall outlet.
1 1 1 1 1 Hooking Up Your DVD Player & TV
In order to use Dolby Digital/DTS soundtracks which are at the heart of home theater you need to hook up your
DVD player with digital audio connections. You can do this by either a coaxial or an optical connection, you don't
need to do both. The quality of these two types of connections is the same but since some digital components
only have one type of digital terminal you need to figure out which yours has and hook it up to the appropriate
terminal on the receiver. In order to do this you will need the proper cable. For coaxial connections you can use a
regular RCA stereo cords or the specially-made coaxial cords, they have the same type of plugs. For optical
connections you will need a special optical cord which you can buy at your local stereo store. Also hook up the
video connection of your DVD player, the analog audio (for recording the audio on DVDs, use regular RCA stereo
cords), and your TV (it's easiest to use a regular composite RCA video cords) as shown below. We also
recommend hooking up your all your digital components to analog audio jacks. For this you can use regular RCA
stereo cords.
Coaxial Digital Connection
If your DVD player has a coaxial terminal (not a PCM-only output) for the audio out hook it up using this terminal.
Follow the diagram below. This is the best scenario, as you will be able to follow the default settings of this
receiver and won't need to assign the digital inputs.
R
4
L
VIDEO INPUT
RCA video cord
RCA video cord
RCA stereo cord
coaxial cord
(not a PCM-only output)
VIDEO
VIDEO
OUT
ANALOG
STEREO
L
L
R
R
DVD player
DIGITAL
OUTPUT