Remote Control - Pioneer VSX-C100 Service Manual

1

Remote control

A
RECEIVER
1
SIGNAL SELECT
2
DVD TV / SAT
3
DVR/ VCR FM / AM
4
AUTO SURROUND
SETUP TEST TONE
5
B
MUTE
6
TOP MENU DISPLAY
7
P
ST
AUDIO
8
EON
P
EXIT
SEARCH
B
C
9
0
CHANNEL
D
1
RECEIVER (Power) button:
This switches between STANDBY mode and power
ON for this receiver.
2 SIGNAL SELECT button
Press SIGNAL SELECT repeatedly to select one
of the following:
ANALOG: To select an analog signal.
DIGITAL: To select a digital signal.
AUTO: This is the default. If there are analog and
digital signals input, the receiver automatically selects
digital. If only analog is input the
E
receiver will select analog.
3 Input/Control Mode Select buttons:
Use to put the receiver/remote control in the input
mode stated on the button. The FM/AM button puts
the receiver in tuner mode if it was in another mode
and switches between the FM and the AM band
if the receiver was already in tuner mode.
F
68
1
2
-
SOURCE
=
SLEEP
~
FRONT
DIMMER
!
SOUND
ADVANCED
MODE
ROOM
CH_SELECT
SETUP
ENTER
MASTER
VOLUME
T.EDIT MENU
@
TUNE
MENU
ST
#
ENTER
SUBTITLE
TUNE
$
RF ATT
GUIDE
A
%
CLASS MPX D.ACCESS
C D E
^
ENTER
10
TV CONTROL
&
INPUT
CHANNEL VOLUME
SELECT
RECEIVER
:
2
3
4 Listening Mode buttons:
Auto button:
Use this button for direct decoding of the input signal
with no added sound effects. The receiver will
automatically detect what kind of signal (stereo,
multichannel, etc.) is being input and play accordingly.
Surround button :
Use this button to choose one of the surround listening
modes this receiver is equipped with.
Advanced button :
Use this button to choose one of the advanced listening
modes this receiver is equipped with.
Sound mode button :
Use this button to choose one of the sound modes
this receiver is equipped with.
5 System setup buttons:
SETUP button :
Use this button to start the receiver setup process
which adjusts the settings to your particular system.
TEST TONE button :
Use to sound the TEST TONE when setting
the volume level of each channel.
CH SELECT button :
Use to select a speaker when setting the volume
level of each channel.
ROOM SETUP button :
Use to set the distance from your speakers
to your normal listening position.
+/– buttons :
Use these buttons when making adjustments
to the SETUP, TEST TONE, or CH.SELECT features.
ENTER button:
Use this button to enter Room Setup commands.
You can also use this button to exit a SETUP mode.
6 Volume buttons:
MASTER VOLUME +/– buttons:
Use to set the overall listening volume.
MUTE button :
Use to mute the sound or restore the sound if it has been muted.
7 TOP MENU button:
Use to return to the most basic menu on a DVD player or disc.
Also used for some tuner commands.
8 AUDIO button:
Use to switch the audio tracks of a DVD when in DVD mode or
to access the EON function when in tuner mode.
9
Number buttons:
Use to enter track number on discs or radio frequencies.
0 CHANNEL +/– buttons:
Use to select channels on other components such as
a DVR or satellite tuner.
- LED indicator:
This indicator flashes when a command is sent from the remote
control to the receiver. It also flashes at when teaching
the receiver preset codes.
= SOURCE (Power) button:
Use this button to turn on and off the power of other components.
~ SLEEP button :
Use to put the receiver in sleep mode and select the amount
of time before the receiver turns off.
!
DIMMER button :
Press to change the display brightness. The dimmer button
allows you to cycle through the four different brightness
strengths for the display.
VSX-C100-S
3
4
4