Table of Contents
Advertisement
REMOTE CONTROL UNIT FACILITIES
REMOTE CONTROL RANGE
When operating the remote control unit, point the front of the
unit at the front panel of the receiver. The remote control unit
may be used within a range of about 7 meters from the remote
sensor, within angles of up to about 30 degrees.
Remote control will not be possible if there is an obstacle be-
tween the remote control unit itself and the remote sensor win-
dow in the receiver, Performance of the remote control unit is
adversely affected in the presence of strong fluorescent light.
Keep such lights away, specially from the sensor window.
LOADING BATTERIES
1. Open the rear cover.
2. Install size "AA" (IEC R6P) batteries correctly matching
the polarities.
3.
Close the cover.
»
SS
|
Incorrect use of batteries may lead to jeakage or
rupture. Always be sure to follow these guidelines:
A: Always insert batteries into the battery compartment correctly
matching the positive (+) and negative (-) polarities, as indicated
in side the compartment.
B: Never mix new and used batteries.
C: Batteries of the same size may have different voltages, de-
pending on their type. Do not mix different types of batteries.
'srreen necewven
nettere Conte wut
py
This remote control unit can be used to operate some functions
of Pioneer
marked CD players and cassette deck.
@ TUNING -/+ button
@ FM/AM button
@ MPX button
@ TAPE 2 MONITOR button
© S.BASS button
When this button is pressed, the bass sound will be emphasized.
© CD operation buttons
CD POWER:
Turns CD player power ON/OFF.
BEST:
Operate the File-type CD player with BEST play
back function.
a:
Pause
a:
Stop
»:
Piay
Hed, ei
Track search
DISC ~/+ :
DISC selection.
NOTE:
+ Note that the DISC button on the accessory remote control
unit may not function, depending on the CD player used.
Refer to your CD player's operating instructions for details.
@ RECEIVER POWER button
DECK operation buttons
TAPE POWER: Turns deck power ON/OFF.
DECK EZ:
DECK FT selection.
DECK I:
DECK
If selection.
<
>:
Reverse and Forward playback.
(Set the function button to TAPE position.)
>:
Rewind in forward mode, fast forward in reverse
mode.
p>:
Fast Forward in forward mode, rewind in reverse
mode.
=:
Stop
mW:
Pause
NOTE:
+ To operate the cassette deck, first press the Deck X or Deck IL
button to select the desired deck. Then press the correct con-
trol buttons.
+ To operate a single deck, first press the Deck IE button. Then
press the correct control buttons.
+ Refer to your cassette deck's operating instructions for details.
@® STATION -—/+ buttons
4 CLASS button
«> MUTING button
Press to temporarily reduce sound. Press again to return to the
original volume level.
(2 FUNC button
Press to select receiver input.
@3 VOLUME +/- button
7
<ARB7067>
Advertisement
Table of Contents
