Remote Control Unit - Pioneer VSX-456 Operating Instructions Manual

Dry cell battery
Remote control unit (size "AA" IEC R6) x 2
REMOTE CONTROL UNIT
memo)
The remote control unit may not work if there are obsta-
cles between the remote control unit and this unit, and if
the remote control unit is not directed towards the re-
mote sensor of the main unit at the correct angle.
The remote control unit may not work properly if strong
light such as direct sunlight and fluorescent light is shin-
ing onto the main unit's remote sensor.
The remote control unit may not work properly when
this unit is used near devices emitting infrared rays, or
when remote control units of other devices which use
infrared rays are used.
On the other hand, the use of this remote control unit
may cause other devices to work improperly.
When the operating range of this remote control unit
becomes too short, replace the batteries.
Lb Dry cell battery
(size "AA" IEC R6) x 2
CAUTIONS
Incorrect use of batteries may result in such
hazards as leakage and bursting. Observe the
following precautions.
« Never use new and old batteries together.
- Insert the plus and minus sides of the batteries prop-
erly according to the marks in the battery case.
¢ Batteries with the same shape may have different
voltages. Do not use different batteries together.
By connecting the control cord (optiona!), other PIONEER
products can be operated using this remote control unit
via this unit. Direct the remote control unit towards the
remote sensor of this unit.
The remote control signals are received by the remote
sensor of this unit, and sent to the other devices via the
CONTROL OUT terminal.
Remote control unit
(——
Other PIONEER
products with
SR mark
Connect to CONTROL IN
terminal of other PIO-
NEER products with SR
mark.
|
7
<ARB7089>
LE er LS a EI om eT RT RT RTE SIN RI ea ee