Frigidaire FRS09PYS1 Installation Manual page 6

Indoor unit outline
6" or more
from the wall
Refrigerant pipe
hole (right) Ø 2.56"
Fixing the Installation Plate
1. Install the installation plate
horizontally over the structural
parts on the wall using the spaces
indicated on the plate, as shown
in the figures above.
2. In the case of tiled, concrete or
similar walls, create 0.2"
diameter holes. Place anchorage
supports for the appropriate
assembly screws.
3. Fix the installation plate to the
wall with eight
4. At all times securing to the wall
studs is recommended.
Drilling the Hole
1. Determine the position of the
hole for the pipes using the
installation plate and drill the
pipe hole so that it is tilted slightly
downward.
2. Always use a pipe cover with an
opening when drilling.
Indoor unit installation
11
6" or more from
the ceiling
1.97''
3.94''
=21500 Btu's (A:39.69" B:12.40")
A type screws.
Installation plate
A
Attention
Fit the Installation Plate and drill holes
in the wall according to the wall
structure and corresponding mounting
points on the installation plate
(Dimensions are in "mm" unless
otherwise stated).
Installation plate
Wall
Indoor unit
6" or more
from the wall
1.97''
Refrigerant pipe
hole (right) Ø 2.56"
4.88''
Outdoor unit