Frigidaire FRS09PYS1 Installation Manual page 10

Settlement of outdoor unit
Anchor the outdoor unit tightly and
horizontally on a concrete or rigid
mount with a bolt and nut 0.39" or
0.32" diameter (Purchased separately).
Outdoor unit dimension
Condensate drainage of outdoor unit
(no for cooling only)
The condensate and defrosting water formd during heating
in the outdoor unit can be properly discharged by drainage
pipe .
Installation method:Insert the drain connection into one of the
25 holes of the chassis and then connect drainage pipe with
Ø
drain nozzle. Insert drainage plugs into the other holes
(Only for 12000Btu's).
Drain
connection
Outdoor unit installation
15
ft(WxHxD)
<
12000 Btu's
Chassis
Air
inlet
A ft)
1 '
Drain
connection
Air inlet
Air outlet
B( ft)
'
Chassis
Drainage
Plug