Advertisement
Setting Up a Wireless (Wi-Fi) Connection
2. With WPS Connect selected, press OK .
3. Select one of these two methods of connecting:
IMPORTANT: Before you press
to enter the generated PIN.
a. With Push Button Configuration selected, press OK.
b. Press or select the WPS button for your wireless router.
NOTE: You will have two minutes to press or select the
WPS button. It may be a button on the device or a
virtual button in the device's software.
4. When the confirmation message appears, press OK.
When the printer is successfully connected, the Wi-Fi status light should be on.
If you are unable to connect your printer, go to www.kodak.com/go/inkjetnetworking.
5. Install the KODAK All-in-One Printer Software on your computer. Follow the on-screen instructions to
complete your setup.
NOTE: If you installed the software before connecting to your network, select Start > Programs >
Kodak > Kodak Printer Network Setup Utility and follow the on-screen instructions.
4
on the printer, make sure you know where the router's button is, or where
Pressing a Button
www.kodak.com/go/aiosupport
Entering a PIN
to select Generate WPS
a. Press
PIN, then press OK.
b. In your wireless router's software,
locate the PIN screen.
c. Enter the PIN you received from the
LCD into the PIN screen.
Advertisement
