Advertisement
Using Color Connector
This section describes how to use the Kodak Professional Colorflow ICC
color connector (color connector) as an assembly tool to create color
connector files.
IMPORTANT:
The dialog boxes in this section show color connector
software used with other Kodak Professional thermal
printers that use different ribbon and media combinations.
The dialog boxes for color connector software used with the
8660 printer look similar and have identical functionality.
System Requirements
Listed below are the hardware and software necessary to run color
connector.
Macintosh Systems
•
60 MHz PowerPC or higher processor with a minimum of 16 MB of
memory. (A 150 MHz PowerPC 604e processor with 32 MB of memory
is recommended.)
•
Macintosh operating system 7.6.1 or higher operating system.
(Macintosh operating system 8.0 is recommended.)
•
a monitor with a minimum spatial resolution of 640 x 480 pixels.
•
a video system with a minimum resolution of 256 colors.
CONTENTS
INDEX
SEARCH
Operator's Guide
Printing Guide
Color Management
Calibration
Network
Interface Guide
Color Management
Options
Using Color
Connector
Menus and Dialog
Boxes
HELP
Advertisement
