Quick Switches - ASROCK X58 EXTREME Installation Manual

HDMI_SPDIF Cable
(Optional)
A. black end

2.10 Quick Switches

2.10 Quick Switches
2.10 Quick Switches 2.10 Quick Switches 2.10 Quick Switches
This motherboard has three quick switches: power switch, reset switch and
clear CMOS switch, allowing users to quickly turn on/off or reset the system or
clear the CMOS values.
Power Switch
(PWRBTN)
(see p.2 No. 22)
Reset Switch
(RSTBTN)
(see p.2 No. 21)
Clear CMOS Switch
(CLRCBTN)
(see p.3 No. 17)
You are not allowed to use Clear CMOS switch function if you set up the system
password. If you want to clear the CMOS values, please clean your system
password in advance or refer to page 24 "Clear CMOS jumper" description
instead.
3 0 3 0 3 0
3 0 3 0
C
B
A
B. white end (2-pin)
ASRock X58 Extreme Motherboard
Please connect the black end (A)
of HDMI_SPDIF cable to the
HDMI_SPDIF header on the
motherboard. Then connect the
white end (B or C) of
HDMI_SPDIF cable to the
HDMI_SPDIF connector of HDMI
VGA card.
C. white end (3-pin)
Power Switch is a quick switch,
allowing users to quickly turn
on/off the system.
Reset Switch is a quick switch,
allowing users to quickly reset
the system.
Clear CMOS Switch is a quick
switch, allowing users to quickly
clear the CMOS values