Pre-Installation Precautions - ASROCK X58 EXTREME Installation Manual

00PRO Catalyst 9.1
00XT Catalyst 9.1
Catalyst 9.1
Catalyst 9.1
Catalyst 9.1
Catalyst 9.1
Catalyst 9.1
Catalyst 9.1
2. 2. 2. 2. 2. Installation Installation Installation Installation
Installation

Pre-installation Precautions

Pre-installation Precautions
Pre-installation Precautions Pre-installation Precautions Pre-installation Precautions
Take note of the following precautions before you install mother-
board components or change any motherboard settings.
1. Unplug the power cord from the wall socket before touching any
component. Failure to do so may cause severe damage to the
motherboard, peripherals, and/or components.
2. To avoid damaging the motherboard components due to static
electricity, NEVER place your motherboard directly on the carpet
or the like. Also remember to use a grounded wrist strap or touch
a safety grounded object before you handle components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded
antstatic pad or in the bag that comes with the component.
5. When placing screws into the screw holes to secure the
motherboard to the chassis, please do not over-tighten the
screws! Doing so may damage the motherboard.
2.1 2.1 2.1 2.1 2.1 CPU Installation CPU Installation CPU Installation CPU Installation CPU Installation
For the installation of Intel 1366-Pin CPU,
please follow the steps below.
Before you insert the 1366-Pin CPU into the socket, please check if
the CPU surface is unclean or if there is any bent pin on the socket.
Do not force to insert the CPU into the socket if above situation is
found. Otherwise, the CPU will be seriously damaged.
ASRock X58 Extreme Motherboard
1366-Pin Socket Overview
1 1 1 1 1 1 1 1 1 1