Installing Three Crossfirex; Ready Graphics - ASROCK X58 EXTREME Installation Manual

Step 2. Connect two Radeon graphics cards by installing CrossFire Bridge on
CrossFire Bridge Interconnects on the top of Radeon graphics cards.
(CrossFire Bridge is provided with the graphics card you purchase, not
bundled with this motherboard. Please refer to your graphics card vendor
for details.)
CrossFire Bridge
Step 3. Connect the DVI monitor cable to the DVI connector on the Radeon graphics
card on PCIE2 slot. (You may use the DVI to D-Sub adapter to convert the
DVI connector to D-Sub interface, and then connect the D-Sub monitor
cable to the DVI to D-Sub adapter.)

2.6.1.2 Installing Three CrossFireX

2.6.1.2 Installing Three CrossFireX 2.6.1.2 Installing Three CrossFireX
2.6.1.2 Installing Three CrossFireX 2.6.1.2 Installing Three CrossFireX
Cards Cards Cards Cards Cards
Step 1. Insert Radeon graphics cards into PCIE2, PCIE4 and PCIE5 slots. Make sure
that the cards are properly seated on the slots.
Step 2. Use one CrossFire Bridge to connect Radeon graphics cards on PCIE2 and
PCIE4 slots, and use the other CrossFire Bridge to connect Radeon
graphics cards on PCIE4 and PCIE5 slots. (CrossFire Bridge is provided
with the graphics card you purchase, not bundled with this motherboard.
Please refer to your graphics card vendor for details.)
ASRock X58 Extreme Motherboard
or

-Ready Graphics

-Ready Graphics -Ready Graphics
-Ready Graphics -Ready Graphics
TM TM TM TM TM
2 1 2 1 2 1
2 1 2 1