Ide Configuration - ASROCK ALIVEDUAL-ESATA2 - V1.2 User Manual

ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Disabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows

3 . 3 . 4 IDE Configuration

3 . 3 . 4 3 . 3 . 4 IDE Configuration IDE Configuration IDE Configuration
3 . 3 . 4 3 . 3 . 4 IDE Configuration
BIOS SETUP UTILITY
Advanced
IDE Configuration
OnBoard IDE Controller
Onboard SATA Controller
SATA Operation Mode
OnBoard SATAII Controller
PCIE-SATAII Operation Mode
HDD Fast Detection
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
SATA1
SATA2
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
OnBoard IDE Controller
You may enable either the primary IDE channel or the secondary IDE channel.
Or you may enable both the primary and the secondary IDE channels by
selecting [Both]. Set to [Disabled] will disable the both. Configuration options:
[Disabled], [Primary], [Secondary], [Both].
Onboard SATA Controller
Use this item to enable or disable the "Onboard SATA Controller" feature.
SATA Operation Mode
Use this item to adjust SATA Operation Mode. The default value of this option
is [non-RAID]. If you want to operate RAID function on SATA / SATAII HDDs,
please select [RAID].
* If you select [RAID] mode, SATA / SATAII HDDs can not be accessed until you finish
configuring RAID functions in NVIDIA BIOS / Windows RAID Utility.
* If you install OS on SATA / SATAII HDDs, please do not change the setting of this
item after OS installation.
* If you install SATA / SATAII device on eSATAII port and plan to make a floppy image
or use Ghost under DOS (Disk Operating System), please set this option to
[non-RAID].
OnBoard SATAII Controller
Use this item to enable or disable onboard PCIE-SATAII controller. The default
value of this option is [Enabled]. Configuration options: [Enabled] and [Disabled].
PCIE-SATAII Operation Mode
Use this item to adjust PCIE-SATAII Operation Mode. The default value of this
option is [IDE]. Configuration options: [RAID], [IDE], [AHCI].
® TM
Vista certification.
DISABLED: disables the
integrated IDE
Controller.
[Both]
PRIMARY: enables only
[Enabled]
the Primary IDE
[non-RAID]
Controller.
[Enabled] SECONDARY: enables
[RAID]
only the Secondary IDE
[Enabled] Controller.
BOTH: enables both IDE
[Hard Disk]
Controllers.
[Not Detected]
Select Screen Select Screen
[ATAPI CDROM]
Select Item Select Item
[Not Detected]
+- +- Change Option Change Option
[Not Detected]
F1 F1 General Help General Help
[Not Detected]
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
4 6 4 6 4 6 4 6 4 6