Chipset Configuration - ASROCK ALIVEDUAL-ESATA2 - V1.2 User Manual

TWTR
Use this to adjust TWTR values. Configuration options: [Auto], [1CLK], [2CLK]
and [3CLK]. The default value is [Auto].
TRWTTO
Use this to adjust TRWTTD values. Configuration options: [Auto], [2CLK],
[3CLK], [4CLK], [5CLK], [6CLK], [7CLK], [8CLK] and [9CLK]. The default value
is [Auto].
TWRRD
Use this to adjust TWRRD values. Configuration options: [Auto], [0CLK], [1CLK],
[2CLK] and [3CLK]. The default value is [Auto].
TWRWR
Use this to adjust TWRWR values. Configuration options: [Auto], [1CLK], [2CLK]
and [3CLK]. The default value is [Auto].
TRDRD
Use this to adjust TRWTTD values. Configuration options: [Auto], [2CLK],
[3CLK], [4CLK] and [5CLK]. The default value is [Auto].
MA Timing
Use this to adjust values for MA timing. Configuration options: [Auto], [2T],
[1T]. The default value is [Auto].
Bank Interleaving
Interleaving allows memory accesses to be spread out over banks on the
same node, or accross nodes, decreasing access contention.
3 . 3 . 2

3 . 3 . 2 Chipset Configuration

3 . 3 . 2 Chipset Configuration Chipset Configuration Chipset Configuration
3 . 3 . 2 3 . 3 . 2 Chipset Configuration
BIOS SETUP UTILITY
Advanced
Chipset Settings
OnBoard Lan
OnBoard UAA Audio
AGP Data Rate
AGP Aperture Size
AGP Fast Write
AGP SideBand Address
Primary Graphics Adapter
CPU - NB Link Speed
CPU - NB Link Width
NB - SB Link Speed
NB - SB Link Width
DRAM Voltage
AGP Voltage
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
OnBoard Lan
This allows you to enable or disable the onboard Lan feature.
To set DRAM Voltage.
[Enabled]
[Auto]
[8X]
[64 MB]
[Disabled]
[Enabled]
[PCI]
Select Screen
[Auto]
Select Item
[Auto]
+ - Change Option
[Auto]
F1 General Help
[Auto]
F9 Load Defaults
F10 Save and Exit
[Auto]
ESC Exit
[Auto]
4 3 4 3 4 3 4 3 4 3